Photo Storify

Photos, Stories and Scrapbooking

Category: Photography Page 3 of 14

South Lake Tahoe

We used to rent bicycles for the 3.8 mile ride from Camp Richardson to Spring Creek, the place where we turned around for the ride back. From the bike trail we’d take the road into the Tallic Estates. We walked the paths on the estate this year. We sat on a bench near the boat house where we had sat previously and we battled for a virtual creature, a Rhydon, at one of the Pokemon gyms on the grounds. There were no Pokemon gyms five years ago although I did have an iPhone by then. Below are the details for creating this page.

On the left, I placed layers from Artsy Layered Template No. 283. On the right side, I placed the frames and text boxes from template 7 of Project Template Album No. 3.

I then placed .jpeg mask 3 from Coolth FotoBlendz No. 1 on the left and mask 1 on the right. I clipped a photo to each mask, adjusted the masks to accommodate my photos and extracted us on a separate layers. I gave the extraction layers a shadow.

Next, I clipped additional photos to the small frames and added adjustment layers to the photos.

On the left, I combined layers from the artsy template with five of the layers from transfer 3 of Artsy Transfers Coolth below the masked photo and frames. On the right, I placed six layers from transfer 3 below the lower two frames and 7 layers from transfer 2 below the masked photo.

Note: I adjusted the color of one layer with a Color Overlay to accommodate the colors in my photos.

To finish the page, I placed three copies of the watercolor flower from ArtPlay Palette Coolth, rotating and resizing for variation. I also repeated a button from the ArtPlay palette. I tacked down the button on the left with thread 11 from ButtonThreadz No. 2. The threads on the right were included with the frames in the template.

Note: My title is in the same position as suggested by the template.

While the small photo on the right, taken in 1999, is the earliest photo that I could find at Pope Estates, we began exploring South Lake Tahoe much earlier. It’s been our favorite place to vacation over the years.

Santa’s Coming Soon

Friday afternoon, I spontaneously decided to drive to Lauritzen Gardens to capture the annual poinsettia display and maybe avoid the crowds. While the massive tree created from red poinsettias was still in the center of the room, there are always variations on how the staff displays the smaller Christmas trees, other varieties of poinsettias and the model trains running throughout. It was a great way to spend a few hours on a Friday afternoon.

It’s easy for me to capture the decorated trees and poinsettias. They don’t move. The little trains are another matter. I keep practicing. Notice the nice blur on the side of the caboose and behind the train. The focus is on Santa and the sign on the back of the caboose.

Camera settings: 55mm, 1/250 sec at f/4.0, ISO 1600.

While I don’t like the photo’s composition, I selected this photo for my layout because of the train’s angle and the amount of track showing on the right of the photo.

First, I placed solid paper 5 from ArtPlay Palette Mistletoe on a new 12×12 document. Next, I sized and placed my photo before extracting the caboose with Santa and the track across the bottom of the layout.

Second, I placed the psd layers of file 3 from Evergreen Fotoblendz No. 2 and clipped linked copies of the same train photo to the layers.

Note: I deleted two of the mistletoe layers.

Next, I added silver paint 1 from ArtPlay Palette Mistletoe below the extraction along the top of the train. Above the extraction layer, I added a copy of the solid paper with an inverted layer mask. I brought back in just the silver edge on the left with a hard round brush. Above and below the paper, I placed two copies of silver paint 2. The top copy is on normal at 50% and the bottom copy 100% on normal with a color overlay.

To finish my page, I placed the psd file of branch 3 from MultiMedia Branches No. 12 along the top of the train. I added a title.

Note: I darkened the berries a little with a Hue and Saturation layer and masked out one white splatter.

I’d like to return to the gardens to practice capturing Santa clearly in focus with his caboose on the left. It’s not enough for a photographer to get the focal point clear, the composition also has to be good. That’s my goal!!

As Simple as 1, 2, 3

Thanksgiving will be a little different for us this year, but I am so thankful for the constancy of fifty years with this man no matter what happens in life. This is one of the simplest layouts I’ve done and it came together so quickly. I love when that happens.

First, I opened .psd file of the frame included in ArtPlay Palette Epiphany and placed it toward the left above solid paper 1. I clipped photo to mask of frame and added an adjustment layer.

Note: ArtPlay Palette Epiphany will be released Friday.Second, I placed overlay 2, copper paint and transfer 3 below the framed photo.Third, I added a word art from Gratitude WordART Mix No 1 and journaling.Life gets hectic as the holidays approach. I’m very grateful for a few minutes to enjoy a little simple art play.

Remember These Moments

I captured the focal photos on Kate’s last day of preschool, the day she told me that I don’t need to miss her when she goes to school next year because she can still spend the night with me. For this page I decided to combine the photos I captured that afternoon in the park with other photos that tell some of her preschool story. Some of them I scanned from a little picture book that her teacher had created for each child and other photos, I had captured with my camera. With Anna’s new Hipster Plume Template Album No. 3, creating a two page spread documenting preschool memories couldn’t be simpler.

Place template 4 on the left and template 5 on the right.

Note: I replaced one square frame on the right with a copy of the smaller square frame.

Clip photos to fotoblendz masks and add Adjustment Layers as needed.

Note: As I have previously explained, I use Adjustment Layers rather than duplicating a photo and changing it’s blend mode. I also used a brush on the masks to darken areas to accommodate the photos I used.

Duplicate photos and clip to stains. At the bottom of the Layers Panel, place a photo across the page gutter. Add an inverted mask and brush back in enough to extend the scene.

Clip photos to small masks and adjust as needed.

Note: I blurred the faces of the other children in two of the photos.

Add title and blue buttons.

That’s it! The hardest part was deciding which pictures I wanted to include and what I to write.

Tulip Garden

The tulips weren’t blooming at Lauritzen Gardens in April, but they were simply stunning at my photography class Wednesday evening. With optimal light on these tulips for about forty-five minutes, I worked the angles with my little camera. My instructor suggested that I capture more of the stems with the tulip flowers. I’m so glad I did because those shots work perfectly with Anna’s new postage stamp frames. Below, I share the steps for working with one photo for the background combined with some detail shots.

Place photo and resize to fit the boundaries of a 12×12 document. Add inverted layer masks and bring back in the photo with AnnaBlendz Artsy brushes. The bottom layer is on color burn blend mode at 100%, the second layer on normal at 75% and the extraction at the top is on normal at 100%. Create a custom shadow for the tulip extraction by putting it on a separate layer, then warping and erasing as desired.

Note: I processed all the photos on this page in Lightroom before adding them to my page. I also added a levels adjustment layer on soft light at 100% just above the masked copy on normal blend mode. I used solid paper 1 from ArtPlay Palette Amaranthine as a foundation for this page.

Below the masked photo and extraction, place transfers 4, 6 and 8 as well as the lace from ArtPlay Palette Amaranthine. Change the blend mode of transfer 4 to linear burn at 75%.

Add transfer 5; mask as needed and change blend mode to liner burn at 75%. At the top of the transfer group, place transfer 3 on normal blend mode at 100%.

Place psd frames 2 and 8 from Postage Frames No. 1. Clip photos to masks. Tilt frames to angle on the page.

Add thread 6 from UrbanStitchez No 12 as an edge for the extraction. Add stitch 11 to tack down the frames. Add button from ArtPlay Palette Hello Autumn and button thread 2 from ButtonThreadz No. 2. Finally, add a title and journaling.

Note: I adjusted the color of the button with two levels adjustment layers, one on overlay at 100% and the other on screen at 50%.

After all the browns, grays and whites of winter, I’m more than ready for some color.

Sayaka Ganz

At my photography class on Wednesday, suspended from the ceiling of the conservatory at Lauritzen Gardens hung a dolphin by Sayaka Ganz. She uses common household plastic objects to create animals with a sense of motion.  and assembles them to create the effect of a Van Gogh painting. She states, “I believe the best way for artists to help reduce waste is to show how beautiful these materials can be and what can be done with the mundane…When we think of these things as beautiful, we value them. If we value our resources, we will waste less.”

As I looked up, I struggled to get the angle of the dolphin amid the palms. I liked the shapes of the fronds, but in a way, they compete with the dolphin. With my 18-70 mm, f/3.4-5.6 zoom, standing below, I was too far away to blur the background in the late afternoon light. However, with photoshop, I can change the emphasis. Below, I share my steps.

Extract the dolphin. Duplicate twice; create a sketch with one and apply an effect to lighten in the second copy. Clip the sketch, 100% color burn, to the copy with the effect. Link the two copies and rotate clockwise so that the dolphin is headed down more. Add a standard shadow to the top dolphin from the style menu and a custom shadow to the original dolphin copy. To do that put the standard shadow on a separate layer and warp it.

Note: I learn a lot about my photography creating these pages. In this case, in an effort to get all the fins, I placed the dolphin in the center and chose a safe angle.

Below the extraction, place another linked copy of the photo. Clip the copy to mask 3 from WaterColor FotoBlendz No. 8. Duplicate the photo twice and apply effects. Above the photo copies position artsy paper 2 from ArtPlay Palette Evanish. Add a layer mask and bring back in just part of the paper with a soft round brush. Change the blend mode to linear burn at 80%.

Note: For this page, I experimented with a watercolor look and a painterly effect in Topaz Studio.

Place artsy paper 3 from ArtPlay Palette Evanish at the bottom of the layers panel.

Note: I chose this paper because the shape fit my photo so well.

To fill in the background, place art strokes 1 and 2 as well as the gold paint 2 from ArtPlay Palette Evanish. Above the gold paint layer, place file 4 from SeaSprinkles No. 2.

Add glows from CoolGlows No. 1 and CoolGlows No. 4, one on linear light at 60% and the other on soft light at 100%. Place blue buttons and tack down with thread 2 from ButtonThreadz No. 3 and thread 10 from ButtonThreadz No. 1.

Note: The buttons are from ArtPlay Palette Socialize and ArtPlay Mini Gelid.

Finally, add a title and journaling.

This is quite a change from my original photo.

Anywhere, Everywhere

We stopped at the park last Thursday for a short time before picking up her brothers from school. I captured her moves when she jumped up on the bench at the park with my iPhone. Actually, Kate is always moving, sometimes to music and at other time just imitating what she has seen, for example these gymnastic moves. She doesn’t mind my taking pictures as long as I slide, swing, climb and dance right along with her. In fact, she will often tell me what I should photograph.

Extractions are one of my scrapbooking strengths. I use them often, so they are fairly quick now. On this page I did use my tablet to control the Quick Selection Tool and masking. Often, I just use the trackpad on my computer. Below, I detail the steps for creating this page.

To create an extraction, trace the image to extract with the Quick Selection Tool, choose refine mask and then output to a mask. With a small, hard round brush, clean up any unwanted pixels. Add a custom shadow.

Complete the other extractions and add shadows. Reduce the size to about 50%. Place psd layers of file 3 from MultiMedia Accordion No. 2. Delete the gold elements and adjust the position of the thread. Rotate the frame 90°. Clip copies of artsy paper 1 from ArtPlay Palette Infatuated to each mask. Add file 1 from UrbanStitchez No. 2 to ground large extraction. Add thread 10 from ButtonThreadz No. 2 to the right side of the frame.

Note: I reduced the size of the paper and linked the copies.

Stamp brush 10 from MiniDots No. 2 vertically and horizontally behind the extraction and frames.

Note: Use the eraser tool to remove overlapping areas.

Place pattern paper 1 from ArtPlay Palette Glance. Using the dots as a pattern, stamp randomly with a hard round brush some black and pink dots. Add and journaling.

I’m going to miss this girl when she’s in kindergarten next year. She is so much fun!!

Different Purposes

On Thursday during my week in California, I flew up to San Francisco to spend the day with my friends, Adryane and Don. Last year it rained, but this time, the weather was perfect t-shirt weather and perfect for making photographs.

I use the photos that I make not only to create art, but also to document the things I want to remember or share with family; in order words, I make pages that I will print through Persnickety or add to the my current book project. This two page spread is for my book.

While I have used both focal photos on this two page spread on two previous pages, I wanted to create something for the next book I will publish. Think about it from an efficiency perspective, I’ve already done some of the creative the work, so why not?

Note: I started with the photos that I previously used on layouts. For information on those previous layouts, see Quick and Simple and Pokemon Go.

I explain the process below.

Place layers of photo on left, deleting layers and changing blend modes as needed. Place photo on right, create a sketch, mask another layer to improve color and maintain blue in sky, add track extension.

Note: I used most of the layers of the photo on the left from a previous page. I placed only the photo on the right but repeated some steps, i.e. making a sketch.

Add frames, stains and art strokes from templates 2, 9 and 13 from WaterColor Template Album No. 5. Clip photos to masks and adjust as needed.

Note: I used the fotoblendz mask from template 9 on the right. I also substituted a frame and mask from template 13 to accommodate the screenshot on the right. I used the frames from template 2 on the left.

Below all the frames, place transfer 1 and 2 from ArtPlay Palette Surf’s Up on the right. On the left, place transfer 7. In the page gutter, place two gold transfers, reversing one. Stamp brushes 5 and 10 in blue. Pull layers from psd files 1 and 4 from Artsy Transfers Surf’s Up to fill in background. Stamp brush 5 in red, rotating for variation.

Note: I chose layers from the artsy transfers based on color and texture to fit my vision for this page.

Place additional photo in page gutter and add an inverted mask. Stamp with brushes from ArtsyPaint 7 and ArtsyPaint 8 on the mask in white to reveal the ship. Align photo with line of background brush on left.

Add Pokeball, red button from ArtPlay Palette Weihnachtsbaum and thread from template 15.

I think it’s okay to reuse photos for different pages, especially if you have different purposes, i.e. art or memory keeping. Both are valuable for me at this point in my life.

Quick and Simple Art

My art is what I create with my photos. On this page, I combined a brush from Pier No. 1 and a photo that I captured in February while visiting Adryane in San Francisco. My sister paints from photos; I combine photo treatments, with papers, transfers, threads and small frames to create art. Below are the steps that I followed for this page.

Stamp brush 6 from Pier No. 1 in a dark blue black. Change the blend mode to linear burn at 100%.

Place mask 4 from WaterColor FotoBlendz No. 6. Duplicate photo 4 times and clip to mask. Create a sketch, normal blend mode at 100%. I lightened the sketch with a levels adjustment layer. Change the blend mode of the second copy to vivid light at 100%. Change the blend mode of the third copy to normal at 70%. Change the blend mode of the fourth copy to lighten at 100%.

Note: While I used Topaz Studio to create a quick sketch, this can be done in the filters menu. I also masked out a part of the fourth copy.

Add a small frame and threads for the photo. Clip photo to frame and adjust as needed.

Note: I pulled a frame and thread from WaterColor Template Album No. 4 for this page.

Place solid paper 1 and pattern paper 2 from ArtPlay Palette Sea Life. Add a layer mask and divide space using the dashed brush line as a guide. Above the papers, place transfers 5 and 11 from ArtPlay Palette Sea Life.

Place word art 6 and beaded thread from Art WordART Mix No. 1. Add text to title in a different font.

Note: I erased part of the stamped title and substituted words to fit what I wanted to convey.

When time is short, I am learning that I can still enjoy my art creating something quick and simple with a photo.

Chrysanthemums

I went early for my evening classes at Lauritzen Gardens last fall just for the light at the magic hour. These evening classes are one of the few times that anyone can enter the gardens just as the sun sets. Normally, they close at five. So I’ve decided that this year, I’m going focus on attending the evening photography classes. I’m looking forward to what I find in April’s evening class.

I’ve been trying to catch up on some pages for my flower album. For this page, I used Anna’s new FotoInspired Template Pack 2H. As I have done with the previous pages, I reduced the size of the template base. However, I did not change the size of the small frame. I deleted the framed mask’s shadow. I changed the color of the mask to white and blurred it so that the photos would show behind the journaling. I then gave the frame a custom shadow using the warp tool.

I clipped my photos to the masks and adjusted as needed with levels adjustment layers.

Below the masks, I layered a brush and overlay from ArtPlay Palette Euphoria as well as layers from transfers 3, 5 and 5 in Artsy Transfers Euphoria.

Finally, I added a title consistent with the other pages I have created for this book. Showcasing my photos couldn’t be easier.

Page 3 of 14

Powered by WordPress & Theme by Anders Norén